If your home or office a lot of magazines and papers that could not be stored, use the special organizers or trays. These organizers you can buy at a stationery store or make yourself. In this article we will show you how to make an organizer for storing magazines with their hands. Such organizers will get expensive, as from a sheet of plywood with a size of 120×120 cm they can be made of 9 pieces.
Materials and tools:
- sheet 6mm plywood 120×120 cm
- Board 25×100 mm, length 2.5 m
- PVA glue
- masking tape
- putty for wood
- paint or varnish
The scheme of sawing up of plywood
How to make organizer
Sawed a sheet of plywood under the scheme.
Assemble the parts of the organizer together. The bottom is fabricated from plates 25 x 100 mm. the Front and rear walls cut out strips of plywood with a width of 100 mm.
Glue the parts with white glue, secure them with masking tape and leave to dry overnight.
If the details are left to the cracks, fill them with putty. Nodules glue can be removed with sandpaper.
Cover the staples with paint or varnish, mix and match the types and colors of coatings in its sole discretion.
Note: these organizers can be decorated with the use of many techniques, for example, painting, applique or decoupage.